About Us
Contact Us
Skip Navigation Links
Documents & Forms
Pay My Bill

                        WSC CCN Map

Backflow Testing

It is the time of the year for your backflow prevention assembly valve on your sprinkler system to be tested. The Texas Commission on Environmental Quality (TCEQ), which is the regulatory agency governing Talty SUD, requires that the public water supply be protected from outside contamination. To ensure this protection, Talty SUD requires an approved backflow assembly on all irrigation systems (sprinkler systems). These devices are to be tested upon installation by a TCEQ Licensed Backflow Inspector and the test form provided to the Talty SUD office.  It is also the policy of Talty SUD to require testing of the assembly annually to help prevent contamination of the water supply. 
You may search for a registered backflow tester at the following links or you may use someone you know if you prefer; however, they must be registered with the Talty Water office to perform these tests.  Below is an approved TCEQ form.
 REMINDER: The deadline for the tests to be performed and results sent to our office is either May 1st or November 1st of every year depending on the testing cycle you are on.  Failure to have the test done and results sent to our office will result in disconnection of service.  Should you have any questions, please feel free to contact our office at (972) 552-4422.